Product Details

Title

 

AC Motor Inverter Drive

 

Brief Introduction

 

XFC500 series ac motor inverter drive uses high-performance DSP (Digital Signal Processors) as the control core and applies excellent performance speed sensorless vector control algorithm to achieve accurate control and regulation of asynchronous motors. The flexible and diverse expansion functions and high reliability design meet the requirements of a variety of applications and environments. As a general-purpose vector control VFD. It is used to drive fans, water pumps, textile machines, machine tools and various automated production equipment.

 

Main Technical Parameters

 

Item		Parameter
Power supply	Rated supply voltage	three phase 380V ~ 480V
	Allowed voltage fluctuations	-15％~+10％
	Rated supply frequency	50/60Hz
	Allowed Frequency Fluctuations	±5％
Output	Max output voltage	Three-phase 380V~480V Go after the input voltage
	Max Output frequency	500Hz
	Carrier Frequency	0.5 ~ 16kHz (automatic adjustment according to the temperature, and the adjustment range differs for different models )
	Overload capacity	150% rated current 60s; 180% rated current 3s.
Basic Functions	Frequency setting resolution	Digital setting: 0.01Hz Analog setting: max frequency × 0.025%
	Control Mode	Open Loop Vector Control (SVC) V/F Control
	Pull-in torque	0.3Hz/150％(SVC)
	Speed range	1 : 200(SVC)
	Speed Stabilizing accuracy	±0.5％(SVC)
	Torque boost	Automatic torque boost Manual torque increase 0.1% ~ 30.0%
	V/F Curve	Three ways: linear type; multi-point type; N-th power V/F curve (n=1.2, 1.4, 1.6, 1.8, 2)
	Acceleration and deceleration curve	Linear or S-curve acceleration and deceleration; Four kinds of acceleration and deceleration time. Adjustable range 0.0~6500.0S
	DC braking	Frequency of DC braking: 0.00Hz ~ max frequency Braking time: 0.0s ~ 36.0s Braking action current value: 0.0% ~ 100.0%
	Jogging control	Jogging frequency range:0.00Hz ~ 50.00Hz Jog acceleration- deceleration time:0.0s ~ 6500.0s
	Simple PLC, multi-stage speed operation	Up to 16-stage speed operation via built-in PLC or control terminal
	Built-in PID	Implementing closed-loop control in process control applications
	Overvoltage and overcurrent stall control	Automatically limit current and voltage during operation to prevent fault shutdown due to frequent over-current and over-voltage
	Fast current limiting function	Reduce overcurrent fault shutdown to ensure the normal operation of the frequency converter
Control interface	Digital input	5 multi-function digital inputs. One of which supports max 100kHz pulse input function
	Analog input	2 analog inputs. Both supporting 0 ~ 10V or 0 ~ 20mA analog input, switch voltage or current input via jumper
	Digital output	2 open-collector digital outputs. One of which supports max 100KHz square wave output
	Analog output	1 analog output. Supporting 0 ~ 10V or 0 ~ 20mA analog output, switch voltage or current output via jumper
	Relay output	1-channel relay output, including 1 normally open contact, 1 normally closed contact
	Standard communication interface	1 channel RS485 communication interface
Expansion interface	Function expansion interface	Connectable to IO expansion card, PLC programmable expansion card, etc.
Operation panel	LED digital display	5-digit display of parameters and settings
	Indicator light	4 status indications, 3 unit indications
	Button's Function	5 function buttons including 1 multi-function button. The function can be set via parameter P0 - 00
	Shuttle Knob	Add, minus and confirm
	Parameter copy	Fast upload and download parameters
Protective function	Basic protection	Input and output phase loss, overvoltage, undervoltage, overheating, overload, overcurrent, short circuit, voltage and current limiting, fast current limiting and other protection functions
Environment	Operation condition	Indoor, no conductive dust and oil, etc.
	Operating ambient temperature	-10°C ~ +40°C (40°C ~ 50°C, derate 1.5% for every 1°C increase in temperature
	Humidity	Less than 95% RH, no condensation
	Operating altitude	No derating below 1000m, derate by 1% for every 100m elevation above 1000m (<=1000m without derating, >1000m with current derating 1% per 100m)
	Ambient temperature for Storage	-20℃ ~ +60℃
	Vibration	Less than 5.9m/s² (0.6g)
	Installation method Mounting mode	Wall-mounted or flush-mounted installation in the cabinet (Need to choose the appropriate installation accessories)
	IP degree of protection	IP20

Mounting Types

 

1. Single machine installation:

 

 

2. Side-by-side installation:

 

 

3. Up and down vertical installation:

 

 

Specifications

 

Model XFC500-3P4-**** G	Motor power		Rated input capacity kVA	Rated input current A	Rated output current A
1K50 G	1.5kW	2.0hp	3.2	4.8	4
2K20 G	2.2kW	3.0hp	4.5	6.8	5.6
4K00 G	4kW	5.4hp	7.9	12	9.7
5K50 G	5.5kW	7.4hp	11	16	13
7K50 G	7.5kW	10.1hp	14	21	17
11K0 G	11kW	14.8hp	20	30	25
15K0 G	15kW	20.1hp	27	41	33
18K5 G	18.5kW	24.8hp	33	50	40
22K0 G	22kW	29.5hp	38	57	45
30K0 G	30kW	40.2hp	51	77	61
37K0 G	37kW	49.6hp	62	94	74
45K0 G	45kW	60.3hp	75	114	90
55K0 G	55kW	73.8hp	91	138	109
75K0 G	75kW	100.6hp	123	187	147
90K0 G	90kW	120.7hp	147	223	176
110K G	110kW	147.5hp	179	271	211
132K G	132kW	177.0hp	167	253	253
160K G	160kW	214.6hp	201	306	303
185K G	185kW	248.1hp	233	353	350
200K G	200kW	268.2hp	250	380	378
220K G	220kW	295.0hp	275	418	416
250K G	250kW	335.3hp	312	474	467
280K G	280kW	375.5hp	350	531	522
315K G	315kW	422.4hp	393	597	588
355K G	355kW	476.1hp	441	669	659
400K G	400kW	536.4hp	489	743	732
450K G	450kW	603.5hp	550	835	822

 

Note: Please contact our sales staff for model selection of 500K and above.

 

CHOOSE SIMO, CHOOSE QUALITY!

 

Hot Tags: AC Motor Inverter Drive, China, suppliers, manufacturers, factory, customized , quotation, low price, in stock, made in China.