Product Details

Brief Introduction

 

The Class B temperature rise limit is set to ensure the motor with y delta motor control diagram does not overheat and cause deterioration and damage to the insulation material during long-term operation, thereby extending the service life of the motor. In addition, controlling the temperature rise can also improve the operating efficiency of the motor, reduce energy consumption and minimize the failure rate.

 

In the design process of this series of electric motor, the realization of Class B temperature rise limit requires comprehensive consideration of several factors, including material selection, heat dissipation design, load characteristics, etc.

 

Winding materials for y delta motor control diagram usually use high-quality copper wires to ensure good electrical conductivity and heat resistance. At the same time, the choice of insulation materials is also crucial and must have good high temperature resistance to meet the requirements of Class B temperature rise limits.

 

Heat dissipation design is a key aspect of controlling motor temperature rise. The electric motor usually uses natural cooling or forced cooling to reduce the temperature. During design, the location and number of radiators need to be reasonably arranged to ensure that the motor can effectively dissipate heat during operation.

 

The load characteristics of the rotating electric motor directly affect its temperature rise. In practical application, the operation mode of the rotating electric motor should be reasonably selected according to the rated power of the motor and the load condition, in order to avoid excessive temperature rise due to overloading.

 

Main Technical Parameters

 

Frame	H560mm
Power Scope	1600kW~2000kW
Voltage	6kV
Frequency	50Hz, 60Hz
Number of Poles	4P
Speed	1485rpm
Cooling Mechod	IC611
Protection Grade	IP55
Insulation Class	F(155℃)
Duty	S1
Mounting Type	IM B3

 

Outline Dimensions

 

 

Motor Parameters