Product Details

Brief Introduction

 

High-voltage 3 phase asynchronous induction motor is a kind of motor widely used in modern industry. It has the advantages of high starting efficiency, simple structure, stable operation, etc. It is widely used in various machinery, metallurgy, mining, chemical industry and other fields of transmission or drive. In this paper, the advantages and applications of high voltage 3 phase asynchronous induction motor will be elaborated from several angles.

 

First of all, the high-voltage 3 phase asynchronous induction motor can start efficiently. When this kind of motor starts, there is no need for any additional starting device or equipment, just connect the motor to the power supply for normal operation. Compared with other motors, the starting current of this motor is small, and it can reach the rated speed in a short time, which is characterized by high starting efficiency.

 

Secondly, the structure of this motor is simple. The high-voltage 3 phase asynchronous induction motor consists of only two parts, stator and rotor, without direct connection and floating brushes, so its structure is simple and easy to maintain. Compared with traditional motors, this motor also runs with less noise, so it is widely used in some occasions with higher noise requirements.

 

In addition, the high-voltage 3 phase asynchronous induction motor is very stable during operation. This is mainly due to the simple and clear operation principle of this motor, and the electromagnetic force between the rotor and stator is balanced. During operation, the running speed of the motor can be adjusted by itself, while the electromagnetic torque of the motor can be maintained in a balanced manner. As a result, the motor has a stable running condition under high load and multi-load conditions, and is widely used.

 

Finally, the high-voltage 3 phase asynchronous induction motor can be applied in various fields. Due to its high starting efficiency, simple structure and stable operation, this motor is widely used in various industries, such as transmission or drive in machinery, metallurgy, mining, chemical industry and other fields. In large machines and equipment, the application of this motor can not only improve the production efficiency, but also reduce the damage to the environment and equipment, which is an indispensable part of modern industry.

 

In summary, the high-voltage 3 phase asynchronous induction motor has the advantages of high starting efficiency, simple structure, stable operation and so on. It has been widely used in various fields and plays an indispensable and important role in the development of modern industry.

 

Main Technical Parameters

 

Frame	H1000mm
Power Scope	1000kW~1600kW
Voltage	10kV
Frequency	50Hz, 60Hz
Number of Poles	16P
Speed	371rpm
Cooling Mechod	IC611
Protection Grade	IP55
Insulation Class	F(155℃)
Duty	S1
Mounting Type	IM B3

Outline Dimensions

 

 

 

Motor Parameters

 

Applications

For lubrication grease used in the 3 phase asynchronous induction motor, it is limited by a throttle plate in the oil inlet pipe to maintain the proper amount of oil entering the bearings, which is provided by the user and installed in the oil supply line. The oil ring is supplied together with the motor to ensure temporary lubrication of the bearings in case of failure of the forced lubrication system. The oil supply pressure is adjustable from 0.01MPa to 0.08MPa. If the pressure is too low or the oil supply is insufficient, it will cause the temperature of the axial tile to be high. High pressure will easily lead to oul leakage.