Product Details

Title:

 

High Voltage AC Motor 5000KW 60HZ

 

Brief Introduction

 

To ensure YRKK series of 5000kw 60hz high voltage ac motor is free from damage, customers should check and accept according to shipping list and read all the labels and instructions.

When the motors with rolling bearing are transported, their bearings have been lubricated with grease and they can be put into operation directly.

When the motors with sliding bearing and rolling bearing which is lubricated with thin oil are transported, there is no oil in bearing box; the surfaces of these bearings and their journals are applied with a layer of anti-rust oil for protection when they are transported.

Do the following jobs immediately after receiving the motors with sliding bearing:

a) To take apart bearing protector at driving end;

b) To visually inspect the conditions of bearing and bearing oil drain hole through oil pointer;

c) To check whether there is water; remove oxidation traces before the motors are used and clean anti-rust oil;

d) To clean bearing box;

e) To inject advanced industrial lubricant (see the section of maintenance) into bearing box and make the oil level reach the normal height;

(f) To rotate drive shaft for at least 10 circles to make the oil distribute various parts of bearing and confirm various oil rings rotate easily and flexibly.

 

Main Technical Parameters

 

Frame	H800
Power Scope	630~5000kW
Voltage	10kV
Frequency	50Hz, 60Hz
Number of Poles	4P, 6P, 8P, 10P, 12P, 16P
Speed	1500rpm, 1000rpm, 750rpm, 600rpm, 500rpm, 370rpm
Cooling Mechod	IC611
Protection Grade	IP55
Insulation Class	F(155℃), H(180℃)
Duty	S1, S4, S5, S6, S9
Mounting Type	IM B3, IM B35, V15, etc
Warranty	1 Year

 

Outline Dimensions:

 

 

Motor Parameters: