Product Details

Title:

 

HV Electric Motor 10KV 450KW

 

Brief Introduction

 

Please check immediately as soon as the YRKK series of hv electric motor arrives. If there is any transportation damage which requires to submit transportation claim for compensation, photos shall be taken within one week after the goods arrive and contacts shall be made with transportation company and manufacturer for checking the evidence for rough handling.

 

After box-opening, carefully clear the dust on external surface of motor and protective layer on drive end fitting surfaces; meanwhile, don't damage the sealing of various combining parts.

 

To remove all the packaging and non-permanent auxiliary devices of motor, clean the dirt on drive end and coupling with petroleum solvent and obey required safety precautions. For winding motors, in order to prevent the working surface of collector ring from forming spots, VCI paper shall be cushioned for insulation between collector ring and electric brush; meanwhile, check whether there is short circuit and looseness for the carbon brush device on slip ring and the conducting wires on various slip rings and carbon brushes; clean the anti-rust oil on conductive slip rings to avoid striking fire when motor operates.

 

To rotate the revolving shaft of motor to see whether it rotates flexibly. If a motor is stored for more than one year, bearing and bearing position shall be gone through to see whether there is corrosion; bearing grease shall be changed for rolling bearing motors.

 

Main Technical Parameters

 

Frame	H710
Power Scope	450~3550kW
Voltage	10kV
Frequency	50Hz, 60Hz
Number of Poles	4P, 6P, 8P, 10P, 12P, 16P
Speed	1500rpm, 1000rpm, 750rpm, 600rpm, 500rpm, 370rpm
Cooling Mechod	IC611
Protection Grade	IP55
Insulation Class	F(155℃), H(180℃)
Duty	S1, S4, S5, S6, S9
Mounting Type	IM B3, IM B35, V15, etc
Warranty	1 Year

 

Outline Dimensions:

 

 

Motor Parameters: