Product Details

Title:

Y2 series Compact Structure High Voltage Three Phase AC Motor

Brief Introduction

Simo Y2 series high voltage three-phase asynchronous motor (center height H355~560) is a compact enclosed squirrel cage rotor three-phase asynchronous motor. The motor is produced according to the technical conditions of JB/T10444-2004, its protection class is IP54, cooling method is IC411.

Y2 Compact Frame HV Motor is mainly used in the motors of some machines that need to be driven, such as compressors, water pumps, cutting machine tools, conveyors, and other industrial equipment. The squirrel-cage rotor is its rotating part. Generally, a copper or aluminum rotor coil is cast in the cage-shaped slot on the rotor core. The coil is a closed loop that is not connected to other parts. The main function is to Suppress the stator current. This design not only guarantees the performance of the motor but also has a wide range of applications due to its simple design.

Main Technical Parameters

Frame:	H355~H560
Power Scope:	160~1600kW
Voltage:	3000V, 3300V, 4160V, 6000V, 6600V, 10000V, 11000V
Frequency:	50Hz, 60Hz
Number of Poles:	2P, 4P, 6P, 8P
Speed	3000rpm, 1500rpm, 1000rpm, 750rpm
Cooling Mechod	IC411
Protection Grade	IP44, IP54, IP55
Insulation Class	F(155℃), H(180℃)
Duty:	S1, S4, S5, S6, S9
Mounting Type	IM B3, IM B35, IMV1, etc

---

Why choose Simo Brand YKS series of Motor?

The rotor of the Y2 Compact Frame HV Motor has high strength, high hardness, and good wear resistance and heat resistance, so it has a long service life. The motor bearing makes it work with high efficiency, but with low noise. The copper movement is not only energy efficient but also safe because the copper wire has low resistivity and good thermal and electrical conductivity. Under the unit cross-section, the copper wire has a large current-carrying capacity and a low voltage loss. In addition, good oxidation resistance can reduce the accident rate caused by harsh environments or overload use.

To meet with different clients’ needs, the motors can be made into foot mounting or vertical mounting, insulation class H, double shaft ends, TH3, plateau and other situations.