Product Details

Brief Introduction 

 

For this series IECEX motor, the main loop outage switch is closed to electrify the motor instantaneously, check whether the motor is started and examine whether rotation direction of the motor is right, if the rotation direction is not consistent with rotation direction regulated in accompanied data, open switch of main loop after stopping the rotor, exchange wiring of the motor by right rotation direction and restart.

 

After normally running the motor, pay attention to examine whether phenomenons such as abnormal sound, vibration and local heating exist within 2h of starting, and frequently examine temperature of motor bearing; it is more valuable to check temperature rise rate of the bearing than check actual temperature of bearing; if temperature rise rate of the bearing is too rapid and exceeds a certain limit, immediately interrupt power of the motor, and check the bearing after stopping the motor.

 

Main Technical Parameters

 

Frame	H355M
No. of Poles	2P, 4P, 6P, 8P, 10P
Power Scope	110~250kW
Voltage	380V/660V
Frequency	50/60Hz
Speed	600rpm, 750rpm, 1000rpm, 1500rpm, 3000rpm
Protection Grade	IP55
Insulation Class	F
Mounting Type	IM V1
Connection	Delta/Y
Mark of Explosion-proof	Exd I Mb, Exd II BT4Gb, Exd II CT4 Gb
Cooling Type	IC411
Efficiency Class	IE3
Duty	S1
Vibration	≤1.8mm/s
Ambient Temperature	-15℃ ～ +40℃
Altitude	≤1000m
Humidity	Average monthly peak relative humidity is 90%

 

Outline Dimensions

 

 

Technical Parameters