Product Details

Brief Introduction 

 

YBK3 series ex electric motor is delivered after regulating partial clearances within the manufacturer, therefore the motor adopting rolling bearing can directly turn to preparation before starting machine after aligning and regulating.

 

Clean site and sweep surroundings.

 

Measure insulation resistance of winding.

 

As for motors below 500V of rated voltage, the cold state resistance value shall no less than 5MΩ; As for motors above 1000V of rated voltage, the cold state resistance value shall no less than 50 MΩ.

 

Measure insulation resistance of winding through 500V megohmmeter, wherein the value measured shall not be less than 5MΩ.

Check whether voltage and frequency supplied are consistent with regulations prescribed on nameplate. Outgoing line shall be reliably connected to grid in accordance with wiring diagram and shall be confirmed to be safe, seeing Fig. 6 for wiring diagram, at which time, unless specific requirement, rotation direction of the motor, viewed from driving end, shall be clockwise direction.

 

Main Technical Parameters

 

Frame	H315S
No. of Poles	2P, 4P, 6P, 8P, 10P
Power Scope	45~110kW
Voltage	380V/660V
Frequency	50/60Hz
Speed	600rpm, 750rpm, 1000rpm, 1500rpm, 3000rpm
Protection Grade	IP55
Insulation Class	F
Mounting Type	IM B3
Connection	Delta/Y
Mark of Explosion-proof	Exd I Mb, Exd II BT4Gb, Exd II CT4 Gb
Cooling Type	IC411
Efficiency Class	IE3
Duty	S1
Vibration	≤1.8mm/s
Ambient Temperature	-15℃ ～ +40℃
Altitude	≤1000m
Humidity	Average monthly peak relative humidity is 90%

 

Outline Dimensions

 

 

Technical Parameters